Get stock photos more clearly
Stable tripod is necessary, in addition, the flyover, locations and contacts in the car passed the entire pedestrian road vibrates, can have the effect of jitter and shooting, so a tripod set up sites also have to consider.
In order to prevent jitter by shutter, it is best to use the 2-second self-timer or remote control, shutter line to trigger the shutter. There is considerable in the wind, stable lives tripod is also very difficult, so try to avoid windy night when shooting. Although the bridge is a very good shooting locations, but often also from the traffic of the impact caused by vibration. (As shown)Accessories to complete
Plenty of battery, solid tripod and a manual exposure feature digital camera is filming of basic conditions, if there is no manual mode, the camera should be at least the aperture priority, exposure compensation, long time exposure of functionality (greater than 1 second exposure time), otherwise it is difficult to shoot out to the satisfaction of stock photos.
Shoot at night, it is best to use a tripod, but if you do not have to carry a tripod, you can find the nearest to stable support cameras, such as a roadside railing, bike seat, etc., because the night shutter generally slow, handheld shooting is easy because the hands of blur caused by jitter, stable picture camera to shoot at night. In addition if the camera has the best lens hood, also put on easily because the night lights glare, interference screen.Noise problems
High ISO and long time exposure is very easy to generate noise and impact on the screen, so the stability of the camera, be sure to use the lowest possible to ISO.
Most digital cameras in the long exposure time will have the functionality of the noise reduction, noise is typically in dark areas are most obvious in the highlights and the darkest places generally is not very obvious, so the exposure time, maintaining a less exposed some of the dark night sky, the sky will appear relatively clean some serious if the noise, you can post processing using noise reduction software for noise reduction, but it should be noted that, although the noise reduction processing can make the screen look clean, but also will make image is blurred, the loss of certain details.Night light and contrast, light complex, will give the metering is small trouble.
Usually recommended average metering, in addition to lighting section too broke too serious, avoid the clutter of stray light effects display, the shooting of proposed to reduce 1 ~ 2 stalls of exposure. Of course, if in order to capture the effect of ablaze with or without reducing the exposure compensation and even increase exposure compensation. For different creative intent, shooting parameters of freedom is great, the different Aperture Shutter combination will get different results. At the time of plenty of cases, the photographer can test several combination of aperture and the shutter, and view the results.
No comments:
Post a Comment