Graphic-profile portrait photography of light distribution

What is a high-profile? "is the color lightness, gives a bright, fresh, soft, clean feeling. Such high-profile pictures of pictures collectively. Shooting high-profile picture should note the following points: 1, high-profile does not mean that too broke, especially shooting such as photo-based photos, but also to guarantee the facial skin's texture and detail. 2, with light with a hard light when if you will

What is a high-profile? "is the color lightness, gives a bright, fresh, soft, clean feeling.

Such high-profile pictures of pictures collectively.

Shooting high-profile picture should note the following:

1, high-profile does not mean that too broke, especially shooting such as photo-based photos, but also to guarantee the facial skin's texture and detail.

2, with light with a hard light when if it results in a heavy shadow, so should be scattered light (i.e., soft light, such as soft light box, reflective umbrella, etc.) as the primary, secondary light and reflectors are also essential.

3. want to shoot out the delicate facial, regardless of what kind of lighting, should have a bit of light from the figures with call back light to enhance facial lighting. 4. as a general rule, figures and background brightness equivalent, high-profile results can, if the background brightness than the body strong, high-profile of an effect is more pronounced, but the background brightness or strongly than the body, it is best not to exceed 1.5 stalls.

5. effect of photo shooting high-profile, light than not too big, hair, facial light it is best not to exceed a 1: 2.

6, character and background distance not too near, generally should be kept in 1.5 — about 2 meters to reduce the shadow effect.

Elegant and soft tones, in the eyes, mouth and face to form Visual focus

Programme I

Exposure: Aperture f/11 speed 1/125 reflective plate dimensions: both sides for 2 * 2.5 m positive 1 * 1.5 m lamp height: 2.5 metres on either side of the front 2 m light to the character's distance: both sides 1.5 m, positive 1.5 m

Scheme 2 side clamp light effect of lighting the way to get more clear clip light effects, closer to the sides of the soft light boxes and figures in the distance, the adjustment is 90 degrees perpendicular to the character's body irradiation, a positive use high angle of reflective umbrella, the positive light than on both sides of the main beam high half a stall, gives the face a greater light before, both sides of the face and shoulders, the back part of the highlights of sunshine, both sides have slightly soft box can leave background a little closer, more light overflow in background, so that will make the picture more clean and bright.

To curve to the side like a beautiful performance, smooth back and has the effect of bright background overflow is character full of charm

Exposure: Aperture speed lights and character of distance: sides 1.2 m, positive 1.5 m camera: Fuji S3 lens: 80-200mm

Scenario three cosmetic face front light people positive high angle irradiation with reflective umbrella, head below use a larger reflector.

The strongest part of the exposure of light to the nose, and then expand to two aspects, in addition to the nose, the nose and cheeks below the bottom of some shadow. Facial light area, unduly soft, beautiful. This way you can have light distribution figures shaped faces shoot out a slip, and the light parts form a radian, boot the viewer's eyes, so that the whole of facial lines more smooth.

In order to take out the flowing water effect, place the characters above his head a little plastic plate, poured water into the plastic plates, slowly flows down the effect of natural vivid

Exposure: Aperture f/8 speed 1/125 lamp height: 2 m light and character of distance: 1.5 m reflective plate dimensions: 2 x 2.5 m

In order to try some changes in the character places a mirror back, slightly raise the head side light, facial shadows more on, note the location of the highlight