Darkroom making some important sections

Darkroom production is an important stage in the creation of photography, has a unique charm, allowing producers to enjoy yourself. However, some fans in the darkroom, on some minor factors did not cause note

Darkroom production is an important stage in the creation of photography, has a unique charm, allowing producers to enjoy yourself.

However, some fans in the darkroom, on some minor factors not noticed, often works. A clean, dark, dust are not.

In such a dark room it is difficult to produce high-quality photos, dust enables blemishes with sand hole, photos, and even beyond.

To maintain darkroom clean, often with a damp cloth to clean the darkroom supplies dust, with a wet MOP MOP the floor, especially in the dry season. Making the best and then erase the photos before dragging. It should be noted in the erase electrical items before you disconnect the power supply to prevent electric shock.

2. darkroom leaked seriously.

Some fans thought the leak light does not impact too big, in fact, in all black, produced by the grave with the leaked photos of darkroom produce photographs that will see how much effect.

Common leaking leaky have outdoor light, zoom player ran into light, security lights too bright. Check whether the leaked anechoic chamber is to enter a dark room, turn off all power lights, about half a minute later, observation for outdoor leaked, and then open the amplification machine power supply for running these rays of light, such as the Chamber of goods can be seen, they will take measures to block light. Check safety lights would be out of a sheet of paper, with black paper to cover half of the safety light for about 5 minutes, and then in the all black in developer, fixing, and observe, such as safety lights take half clear gray black, then safety lamp certainly no, to replace or reduce the brightness.

Third, the developer does not wash off after the photos or digital direct fixing.

Start several sheets may not be affected, but soon your Fixer will fail, the photos are not fully fixing, even will continue to do the work for the developer, can affect pilots.

4. washing is not sufficient.

Some fans to hurry and put several photos together water and rough rough few to check out.

Such photos, also contains a large number of fixative, in the air for long time will change colour.

Fifth, the AF is not careful.

Enlarge photos, not seriously focus, will make the photo production standards when unstable, hit-or-miss.

Use unreliable af for focusing, often causing the focus is not real. You should check the enlarger is not positive, consistent with the Center are the focus. The correct approach is to use the same thickness and photo paper, turn off the security of a white lamp to seriously focus, and observe all the focus is on solid, especially making huge photo, Terry. Note that these small details that can make your photos meet the highest quality requirements.