Use PS to waste processing into landscape painting tutorial

First the original diagram (Figure 1) and effect diagram (Figure 2) (Figure 1) (Figure 2) 1, the use of DCE processing filters automatically repairs (Figure 3) 2, use hue saturation increases saturation, then sealed layers and save as JPG format (Figure 4) 3, open the Neat Image filters, enter just save the jpg image for the red, the default action in the coil, and output image. (Figure 5) 4,

First the original diagram (Figure 1) and effect diagram (Figure 2)

(Figure 1)

(2)

1. use DCE filters — automatically repairs processing

(3)

2, use hue saturation increases saturation, then sealed layers and save as JPG format

(Figure 4)

3. open the Neat Image filters, enter just save the jpg image for the red, the default action in the coil, and output image.

(Figure 5)

4, to just output the image on the top, make the color balance

(Figure 6)

5. to increase the saturation in the hue/saturation

(Figure 7)

6, duplicate the layer by layer 2 2 copies placed at the top, to multiply, the opacity is 50%, and Layer 2 curves adjustment, as in Figure

(Figure 8)

7, 3-get the layers, and copy the resulting layer 3 copies of the diffuse glow and set to filter color, opacity 70%

(Figure 9)